Specifications
Technology
Pre-installed Modules: 4 embedded Gigabit ports
Module: 6 slots for optional 4-port FE/GE modules
Slot Combination: See the LM-7000H module series datasheet for more information
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for flow control
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1X for authentication
Interface
Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
USB Connector: USB Type A (Reserved)
Digital Input Channels: 1 (On MGMT Module)
Digital Inputs: +13 to +30 V for state 1, -30 to +3 V for state 0, Max. input current: 8 mA
Alarm Contact Channels: 3 (On MGMT, PWR1, PWR2 Module), Relay output with a current-carrying capacity of 2 A @ 30 VDC
Physical Characteristics
IP Rating: IP40
Dimensions: 218 x 115 x 163.25 mm (8.59 x 4.53 x 6.44 in)
Weight: 2840 g (6.27 lb)
Installation: DIN-rail mounting, Wall mounting (with optional kit), Rack mounting (with optional kit)
Environmental Limits
Operating Temperature: Standard Temperature: -10 to 60°C (-14 to 140°F), Wide Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage:
Isolated redundant power module
with PWR-LV-P48 installed 24/48 VDC for the switch system, 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)
with PWR-HV-P48 installed 110/220 VDC/VAC for the switch system 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)
Operating Voltage:
with PWR-LV-P48 installed 18 to 72 VDC for the switch system, 46 to 57 VDC for PoE systems
with PWR-HV-P48 installed 88 to 300 VDC, 90 to 264 VAC for the switch system 46 to 57 VDC for PoE systems
Input Current:
with PWR-LV-P48 installed, PWR input current (switch system), Max. 0.53 A @ 24 VDC, Max. 0.28A @ 48 VDC
with PWR-HV-P48 installed, PWR input current (switch system), Max. 0.11 A @ 110 VDC, Max. 0.06 A @ 220 VDC, Max. 0.29 A @ 110 VAC, Max. 0.18 A @ 220 VAC
Overload Current Protection: Supported
Reverse Polarity Protection: Supported
Warranty
Warranty Period: 5 years
Read less...